Readarr Installation

Installing

Windows

Please see the the Readarr website for the Windows installer.

OSX

Readarr is in a pre-alpha state. Instructions will be built once Readarr is stable (i.e. alpha).

Linux

Debian/Ubuntu

.NET Core Install

You'll need curl and sqlite. sudo apt install curl sqlite3

Manual Install

Go to the Readarr discord and locate the binaries

Note: this assumes you created a user named readarr

Download this file onto your system:

 wget --content-disposition '{Readarr is pre-alpha; link hidden from the public}'

Uncompress:

tar -xvzf Readarr*.linux-core-x64.tar.gz

Move to your preferred install location (typically /opt/Readarr/

sudo mv Readarr/ /opt

Finally, make sure you grant the needed permission to your install directory:

sudo chown readarr:readarr /opt/Readarr

You can start Readarr with the following command:

/opt/Readarr/Readarr -nobrowser

Prowlarr

OSX

Detailed instructions coming "soon" For now please see our website for details: https://prowlarr.com/#downloads-v3-macos

Debian/Ubuntu

.NET Core Install

You'll need curl and sqlite. sudo apt install curl sqlite3

Manual Install

Note: this assumes you created a user named prowlarr In the example screenshot here, you can see multiple options. Choose the option that matches your OS and processor best. For most users, this would be .linux-core-x64.tar.gz selected via arch=x64 in the url.

For:

• ARM use arch=arm
• ARM64 use arch=arm64
• AMD64 use arch=x64

Download this file onto your system: (Note: The link below will target the Linux .NET Core x64 file. Replace if needed with the file you chose previously)

 wget --content-disposition 'https://prowlarr.servarr.com/v1/update/nightly/updatefile?os=linux&runtime=netcore&arch=x64'

Uncompress:

tar -xvzf Prowlarr*.linux*.tar.gz

Move to your preferred install location (typically /opt/Prowlarr/

sudo mv Prowlarr/ /opt

Finally, make sure you grant the needed permission to your install directory:

sudo chown prowlarr:prowlarr /opt/Prowlarr

You can start Prowlarr with the following command:

/opt/Prowlarr/Prowlarr -nobrowser

Code Blocks

Radarr

Preparing the Unit Service File

[Unit]
Description=Radarr Daemon
After=syslog.target network.target

[Service]
# Change the user and group variables here.
User=radarr
Group=radarr

Type=simple
#Update the data path
ExecStart=/opt/Radarr/Radarr -nobrowser -data=/path/to/appdata/for/Radarr/

TimeoutStopSec=20
KillMode=process
Restart=always

[Install]
WantedBy=multi-user.target

Sonarr

Preparing the Unit Service File

Manual installs methods are unsupported and you'll need to determine the process yourself.

Lidarr

Preparing the Unit Service File

[Unit]
Description=Lidarr Daemon
After=syslog.target network.target

[Service]
# Change the user and group variables here.
User=lidarr
Group=lidarr

Type=simple

# NetCore install:
# Update the data path
ExecStart=/opt/Lidarr/Lidarr -nobrowser -data=/path/to/appdata/for/Lidarr/

TimeoutStopSec=20
KillMode=process
Restart=always

[Install]
WantedBy=multi-user.target

Readarr

Preparing the Unit Service File

[Unit]
Description=Readarr Daemon
After=syslog.target network.target

[Service]
# Change the user and group variables here.
User=readarr
Group=readarr

Type=simple

# NetCore install:
# Update the data path
ExecStart=/opt/Readarr/Readarr -nobrowser -data=/path/to/appdata/for/Readarr/

TimeoutStopSec=20
KillMode=process
Restart=always

[Install]
WantedBy=multi-user.target

Prowlarr

Preparing the Unit Service File

[Unit]
Description=Prowlarr Daemon
After=syslog.target network.target

[Service]
# Change the user and group variables here.
User=prowlarr
Group=prowlarr

Type=simple
#Update the data path
ExecStart=/opt/Prowlarr/Prowlarr -nobrowser -data=/path/to/appdata/for/Prowlarr/

TimeoutStopSec=20
KillMode=process
Restart=always

[Install]
WantedBy=multi-user.target

Auto Start Using Systemd

Most modern Linux distributions have switched to systemd, which involves a simple unit service file which gets enabled and started. It is important to remember that in Linux, capitalization matters. User account names and Group names are typically all lowercase, as are the directory structures mapped to them as part of the home directory.

Preparing the Unit Service File

Several items may need to be changed to match your installation:

1. User should match the service account that readarr will run as.
2. Group should match the service account group that readarr will run as.
3. ExecStart has several items that should match your installation /opt/Readarr/Readarr
   1. Executable Path Default location is /opt/Readarr/Readarr, but you may need to update if you installed Readarr elsewhere.
   2. Data Directory Default location is -data=/home/$USER/.config/Readarr/, but you may need to update if you want to keep your database and settings elsewhere.

The unit service file should be named Readarr.service and the best place for it is /etc/systemd/system/. Alternative locations like /usr/lib/systemd/system/ and /lib/systemd/system/ may depend on the distribution used.

This example unit assumes that the User and Group are both readarr, Readarr's executable is placed in /opt/Readarr/. Please update the data path to where you want the database, logs, and other metadata stored.

[Unit]
Description=Readarr Daemon
After=syslog.target network.target

[Service]
# Change the user and group variables here.
User=readarr
Group=readarr

Type=simple

# NetCore install:
# Update the data path
ExecStart=/opt/Readarr/Readarr -nobrowser -data=/path/to/appdata/for/Readarr/

TimeoutStopSec=20
KillMode=process
Restart=always

[Install]
WantedBy=multi-user.target

Verify Directory Permissions

Ensure the User that will be running Readarr has access to both the executable directory and data directory. Running the command ls -lad /directory/ will show the permissions for that folder. Example:

$ ls -lad /opt/Readarr
drwxr-xr-x 6 readarr readarr 24576 Nov 28 21:30 /opt/Readarr/
$ ls -lad /home/$User/.config/Readarr/
drwxr-xr-x 6 readarr readarr 24576 Nov 28 21:30 /home/$User/.config/Readarr/

Enabling and starting the Unit Service File

Once you have created Readarr.service, you will want to enable the service:

sudo systemctl enable Readarr.service

You are now ready to start Readarr. You can do so with the start command:

sudo systemctl start Readarr.service

If you want to verify Readarr is running, you can run the status command:

 $ sudo systemctl status Readarr.service
● Readarr.service - ReadarrService
   Loaded: loaded (/usr/lib/systemd/system/Readarr.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2017-03-07 10:23:44 PST; 5min ago
 Main PID: 19978 (Readarr)
    Tasks: 16 (limit: 4915)
   Memory: 114.6M
      CPU: 9.331s
   CGroup: /system.slice/Readarr.service
           └─19978 /opt/Readarr/Readarr -nobrowser -data=/path/to/data/.config/Readarr/
Mar 07 10:23:44 apollo systemd[1]: Started Readarr Service.

NGINX Reverse Proxy

A reverse proxy allows you to set up Readarr so you can access it from the web without using the port number. Rather than mydomain.com:8787 you would use mydomain.com/Readarr instead.

It is assumed you have NGINX installed.

Create a text file named Readarr.conf and place it in your default NGINX App directory, typically /etc/nginx/conf.d/apps

1. Readarr Reverse Proxy
2. Be sure to set your Base-URL in Readarr

   location /readarr {
           proxy_pass http://127.0.0.1:8787/readarr;
           proxy_set_header X-Real-IP $remote_addr;
           proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
           proxy_set_header X-Forwarded-Proto $scheme;
           proxy_http_version 1.1;
           proxy_no_cache $cookie_session;
           proxy_set_header Upgrade $http_upgrade;
           proxy_set_header Connection $http_connection;
           # Allow the Readarr API
           location /readarr/api { auth_request off;
                   proxy_pass http://127.0.0.1:8787/readarr/api;
           }
   }

Please note: It is important to ensure that the line proxy_set_header Connection $http_connection; is accurate. The NGINX documentation recommends setting this to Upgrade rather than $http_connection; but this will NOT work.

Once you have saved the file, test your NGINX config:

 sudo nginx -t

Which should show this:

 nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
 nginx: configuration file /etc/nginx/nginx.conf test is successful

Now you can have NGINX reload it's configuration to use the new file:

 sudo nginx -s reload

Finally, make sure you add your URL Base to Readarr. This should match what you have next to the word Location in the Readarr.conf file, with the leading slash, likely this: /readarr The URL base can be set here: https://wiki.servarr.com/Readarr_Settings#Host

Docker

Please refer to TRaSH's Guide.

Docker on unRAID

• Installation of Readarr is quite simple when it comes to unRAID as they have made installing Docker containers a breeze.

1. Simply head on over to the community applications store on the top bar of your browser.
   

2. In the search field type in Readarr
   

3. Select which docker image you would like to install. There are several to choose from
   



4. Depending on which container you go with will determine the steps in which you take. Some containers come preloaded with volumes mapped already. This is really up to your liking how you would like your container volumes to be laid out. It is highly recommended to follow the guide listed here for your volume mapping
   

Depending on which container you select you may recieve a pop up asking you to Choose A Branch To Install when in doubt go with the Default :latest branch

5. Once you have selected which container you are going to go with, you will need to either create the volumes for Readarr to be able to use or simply use the pre-filled ones. (Highly recommended to remove the pre-filled and use your own, to remove the pre-filled ones).
   

To remove the pre-filled paths simply select the toggle in the upper right from Basic to Advanced view then scroll down to the pre-filled path and click Remove



1. To create new volumes simply select the Add another Path, Port, Variable, Label or Device text at the bottom above the Apply button.
   

2. Once the new window appears you will want to use the drop down box next to Config Type: and make sure that it is set to Path.
   

3. From here you will want to fill out all pertinent information:
   

1. Name: The name of this path, this can be any unique name more like a note to know what this path is for.
   

2. Container Path: This will be the path that Readarr will see inside the container /data is a favorite
   

3. Host Path: This is the path to the host (unRAID) machine, This will be /mnt/user/<Your User Share>
   

NOTE If you follow the Docker Guide you will only need one Volume path to be made as all information that Readarr will need will be in one share /mnt/user/data

4. The last three items Default Value:, Access Mode", and Description: Can be left alone.
   

5. Click ADD
   



4. Last thing to check is to make sure Host Port for 8787 is filled in with 8787, UNLESS This port causes any conflicts with any other container. If it does please choose a different port that is not in use.
   

5. Click APPLY
   

6. Now the Readarr's container is being downloaded, once complete simply click the OK button at the bottom of the new pop up window
   

7. Click DOCKER on the top row of your browser.
   

8. Now all you will need to do is simply left click on your newly created container and select WebUI.
   



9. Now a new browser tab should show up with Readarr running in all its glory.