Cloud Setup

From Servarr

Rclone, Mergerfs, and Google Drive

With many options for storing 'unlimited' data in the cloud, configuring your system to allow your Arr's and media serving apps to access the data securely is possible. For this guide we will use Google Suite Unlimited Storage or a similar Rclone compatible storage service. We will also use a utility called Mergerfs to help keep our uploads organized.

Please note that this guide is for information only and you should only store legally obtained media.

Please Note: To get unlimited storage with Google Drive, you should have 5 users (as of writing $12*5 users = $60/mo). If you have less users you technically do not have unlimited storage and Google may enforce said limits at any time.

Application Overview

Recommendations:

  • Don't download into your Gdrive - Download to a local disk and move the data later w/ Rclone
  • Don't import to your Gdrive - Set up a merged local cache disk and move the data later w/ Rclone
  • Do all large writes locally
  • Move to cloud on a schedule - Easily scriptable
  • Absolutely do not write (large files) directly to the rclone mount

To connect with your Gdrive, you will need to use three applications:

  1. Rclone - https://rclone.org/install/
  2. mergerfs - https://github.com/trapexit/mergerfs
  3. fuse - https://manpages.ubuntu.com/manpages/eoan/man8/mount.fuse.8.html

Once you have set up these applications, it is highly recommended to set up a cron job to automatically move files from your local drive to the cloud using Rclone. Animosity22 has a terrific Github page with a sample script, or see the example below.

Rclone

Rclone's core purpose for the Arr's is to allow access to your data depository that is located in Gdrive. Rclone will mount and serve your file automatically, with your apps not knowing they are accessing data in the cloud. More Rclone information can be found on animosity22's Github page.

To install Rclone, run the following command:

 curl https://rclone.org/install.sh | sudo bash

Setting up Rclone

To get started with an Rclone Google Suite Team Drive Mount follow the below instructions.

Making your own Google API Client ID When you use rclone with Google drive in its default configuration you are using rclone's client_id. This is shared between all the rclone users. There is a global rate limit on the number of queries per second that each client_id can do set by Google. It is strongly recommended to use your own client ID as the default rclone ID is heavily used.

  1. Log into the Google API Console with your Google account. It doesn't matter what Google account you use. (It need not be the same account as the Google Drive you want to access)
  1. Select a project or create a new project.
  1. Under "ENABLE APIS AND SERVICES" search for "Drive", and enable the "Google Drive API".
  1. Click "Credentials" in the left-side panel (not "Create credentials", which opens the wizard), then "Create credentials"
  1. If you already configured an "Oauth Consent Screen", then skip to the next step; if not, click on "CONFIGURE CONSENT SCREEN" button (near the top right corner of the right panel), then select "External" and click on "CREATE"; on the next screen, enter an "Application name" ("rclone" is OK) then click on "Save" (all other data is optional). Click again on "Credentials" on the left panel to go back to the "Credentials" screen.
  1. Click on the "+ CREATE CREDENTIALS" button at the top of the screen, then select "OAuth client ID".
  1. Choose an application type of "Desktop app" if you using a Google account or "Other" if you using a GSuite account and click "Create". (the default name is fine)
  1. It will show you a client ID and client secret. Write or copy these values down. Use these values in rclone config to add a new remote or edit an existing remote.
Setup your Google Service Account (SA) file this allows it to not be tied to a single user account.
  1. go to the Google Developer Console.
  1. go to "IAM & admin" -> "Service Accounts".
  1. Use the "Create Credentials" button. Fill in "Service account name" with something that identifies your client. e.g. mount Leave "Role" Empty
  1. Tick "Furnish a new private key" - select "Key type JSON".
  1. Tick "Enable G Suite Domain-wide Delegation". These credentials are what rclone will use for authentication. If you ever need to remove access, press the "Delete service account key" button.

Allow API access to Google Drive

  1. go to admin console
  2. Go into "Security" (or use the search bar)
  3. Select "Show more" and then "Advanced settings"
  4. Select "Manage API client access" in the "Authentication" section
  5. In the "Client Name" field enter the service account's "Client ID" - this can be found in the Developer Console under "IAM & Admin" -> "Service Accounts", then "View Client ID" for the newly created service account. It is a ~21 character numerical string.
  6. In the next field, "One or More API Scopes", enter https://www.googleapis.com/auth/drive to grant access to Google Drive specifically.


rclone config

  1. n - New Remote
  2. Enter a name for your mount e.g. cloud
  3. 13 - Google Drive
  4. Enter your Google Application Client Id
  5. Enter your Google Application Client Secret
  6. 1 - Full Access
  7. Leave Blank ID of the root folder
  8. enter the path and filename to your Google Drive SA Json
  9. n - Do Not Use Auto Config
  10. y - use team drive
  11. Review for Accuracy
  12. mount the drive using rclone mount --daemon --daemon-timeout=5m --allow-non-empty --buffer-size=128M --use-mmap --dir-cache-time=48h --cache-info-age=48h --vfs-cache-mode=full --vfs-cache-max-age=6h --log-file=~/.config/rclone/logs/rclone.log --log-level INFO cloud: /cloud

When you executed rclone config above, it created a file rclone.conf and placed it at ~/.config/rclone.conf. If you intend to have your OS auto-mount your new rclone mount using systemd, ensure this file is accessible by the user you have in your .conf file.

Encrypting your Cloud Storage

If you followed the previous steps, you created an unencrypted Google Drive mount. If you would like to encrypt your storage so that Google can not scan your files (good idea!), then follows these optional steps:

Start by running Rclone's config tool again, as you did previously:

 rclone config
  1. n - New Remote
  2. cloudcrypt - Name of your new encrypted remote
  3. crypt - Encrypt/Decrypt a remote
  4. cloud:crypt - Remote to encrypt/decrypt, followed by a semicolon and a name indicating the function.
  5. standard - How to encrypt the filenames.
  6. true - Encrypt directory names

The next few questions will ask you to create two passwords, one for the encryption and one for the salt. It is recommended to choose two different passwords, and for the best protection, allow them to be generated for you and document them somewhere safe.

Once the password section is finished, it should present you with the new config, which should look similar to this:

 [cloudcrypt]
 type = crypt
 remote = cloud:crypt
 filename_encryption = standard
 directory_name_encryption = true
 password = **Encrypted PW1**
 password2 = **Encrypted PW2**

Finally, make sure when you run rclone (either manually or via autostart script), you mount cloudcrypt rather than calling cloud.

Rclone Linux Autostart using Systemd

Most modern Linux distributions have switched to systemd, which involves a simple unit service file which gets enabled and started. It is important to remember that in Linux, capitalization matters. User account names and Group names are typically all lowercase, as are the directory structures mapped to them as part of the home directory.

Preparing the Unit Service File

Several items may need to be changed to match your installation:

  1. User should match the service account that Rclone will run as.
  2. Group should match the service account group that Rclone will run as.

The unit service file should be named Rclone.service and the best place for it is /etc/systemd/system/. Alternative locations like /usr/lib/systemd/system/ and /lib/systemd/system/ may depend on the distribution used.

This example unit assumes that the User and Group are both plex, Rclone's executable is placed in /usr/bin/, your cloud storage is being mounted to /cloud, and you have previously ran Rclone and set up a config file, which is located at ~/.config/rclone/rclone.conf Feel free to remove the # comment lines, they are there for those who want to know what those flags are doing and were taken from the rclone documentation.

 [Unit]
 Description=Google Drive Encrypted (rclone)
 Wants=network-online.target
 After=network-online.target
 
 [Service]
 Type=notify
 ExecStart=/usr/bin/rclone mount cloud: /cloud \
 # Allow mounting over a non-empty directory (not Windows).
 --allow-non-empty \
 # In memory buffer size when reading files for each --transfer. (default 16M)
 --buffer-size=128M \
 # Use mmap allocator (see docs).
 --use-mmap \
 # Time to cache directory entries for. (default 5m0s)
 --dir-cache-time=48h \
 # How long to cache file structure information (directory listings, file size, times etc). (default 6h0m0s)
 --cache-info-age=48h \
 # Cache mode off|minimal|writes|full (default off)
 --vfs-cache-mode=full \
 # Max age of objects in the cache. (default 1h0m0s)
 --vfs-cache-max-age=6h \
 # Override the permission bits set by the filesystem.
 --umask 002 \
 # Location where rclone logs will be stored
 --log-file=~/.config/rclone/logs/rclone.log \
 # Logging level for rclone logs
 --log-level INFO \
 # Location where the rclone.conf file is located
 --config ~/.config/rclone/rclone.conf
 ExecStop=/bin/fusermount -uz /cloud
 Restart=on-abort
 User=plex
 KillMode=none
 RestartSec=5
 
 [Install]
 WantedBy=default.target
Verify Directory Permissions

Ensure the User that will be running Rclone has access to both the executable directory and data directory. Running the command ls -lad /directory/ will show the permissions for that folder. In the example below, the user and group are both plex. Example:

$ ls -lad /cloud
drwxr-xr-x 6 plex plex 24576 Nov 28 21:30 /cloud
$ ls -lad /home/plex/.config/rclone/
drwxr-xr-x 6 plex plex 24576 Nov 28 21:30 /home/plex/.config/rclone/
Enabling and starting the Unit Service File

Once you have created Rclone.service, you will want to enable the service:

sudo systemctl enable Rclone.service

You are now ready to start Rclone. You can do so with the start command:

sudo systemctl start Rclone.service

If you want to verify Rclone is running, you can run the status command:

 $ sudo systemctl status rclone.service 
 ● rclone.service - Google Drive Encrypted (rclone)
      Loaded: loaded (/etc/systemd/system/rclone.service; enabled; vendor preset: enabled)
      Active: active (running) since Sun 2020-11-15 16:28:26 MST; 2 weeks 4 days ago
    Main PID: 2392484 (rclone)
       Tasks: 31 (limit: 76935)
      Memory: 21.9G
      CGroup: /system.slice/rclone.service
              └─2392484 /usr/bin/rclone mount cloud: /cloud --allow-non-empty --buffer-size=128M --use-mmap --dir-cache-time=48h >
 Nov 15 16:28:25 systemname systemd[1]: Starting Google Drive Encrypted (rclone)...
 Nov 15 16:28:26 systemname systemd[1]: Started Google Drive Encrypted (rclone).

Mergerfs

Mergerfs core purpose for the Arr's is to allow you to have a single merged directory structure, based on two different directories. For example, if you used rclone to mount a directory named /cloud and you have a locally mounted directory named /local, mergerfs would create a single merged directory of those two, which you could call /merge. Your media server and Arrs would access /merge and see the combination of local + cloud storage.

Example: You have the first 4 episodes of 'Popular TV Show' located on your cloud drive, and Sonarr just downloaded and imported episode 5. If you looked in your cloud drive (/cloud), you would see:

 /cloud/TV Shows/Popular TV Show/S01E01.mkv
 /cloud/TV Shows/Popular TV Show/S01E02.mkv
 /cloud/TV Shows/Popular TV Show/S01E02.mkv
 /cloud/TV Shows/Popular TV Show/S01E04.mkv

If you looked in your local storage (/local) you would see:

 /local/TV Shows/Popular TV Show/S01E05.mkv

And if you looked in the merged directory thanks to mergerfs (/merge) you would see:

 /merge/TV Shows/Popular TV Show/S01E01.mkv
 /merge/TV Shows/Popular TV Show/S01E02.mkv
 /merge/TV Shows/Popular TV Show/S01E02.mkv
 /merge/TV Shows/Popular TV Show/S01E04.mkv
 /merge/TV Shows/Popular TV Show/S01E05.mkv

None of your applications know that these files have two different real file paths. All new files would always be written to your local HD, then you can use Rclone to sync them to the cloud later. When that sync is completed, its invisible to your apps so you do not need to worry about missing episodes or movies.

Setting up Mergerfs

Mergefs has a dependency on Fuse, so we will start by installing that:

 sudo apt install fuse

Next, we must modify the fuse.conf file to enable the allow_other funtion:

 sudo nano /etc/fuse.conf

Modify the last line by removing the # before user_allow_other. It should look like this:

  # Allow non-root users to specify the allow_other or allow_root mount options.
  user_allow_other

Now we can install Mergerfs. Go to the Mergerfs github page and download the newest release that matches your install.

 wget https://github.com/trapexit/mergerfs/releases/download/2.32.0/mergerfs_2.32.0.ubuntu-focal_amd64.deb

And then install it:

 dpkg -i mergefs*.deb

To execute Mergerfs, run the following command. This assumes your local storage is mounted at /local, your cloud storage is mounted at /cloud, and your merged mount is /merge. Note: There are no spaces in the variables passed to the -o flag, so it looks like a giant run on list and should be a single line.

  /usr/local/bin/mergerfs /local:/cloud /merge -o rw,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=auto-full,statfs_ignore=nc,func.getattr=newest,dropcacheonclose=true,nonempty

Once you verify that everything is working, it is recommended to use an autostart file configured to start after Rclone.

Mergerfs Linux Autostart using Systemd

Most modern Linux distributions have switched to systemd, which involves a simple unit service file which gets enabled and started. It is important to remember that in Linux, capitalization matters. User account names and Group names are typically all lowercase, as are the directory structures mapped to them as part of the home directory.

Preparing the Unit Service File

Several items may need to be changed to match your installation:

  1. User should match the service account that Mergerfs will run as.
  2. Group should match the service account group that Mergerfs will run as.

The unit service file should be named to match your merged folder name. If you have followed along with this wiki, that name would be merge so your service file would be namedmerge.service, and the best place for it is /etc/systemd/system/. Alternative locations like /usr/lib/systemd/system/ and /lib/systemd/system/ may depend on the distribution used.

This example unit assumes that the User and Group are both plex, Mergerfs's executable is placed in /usr/local/bin/, your local storage is mounted at /local, your cloud storage is mounted at /cloud, and your merged mount is /merge.

 [Unit]
 Description=Mergerfs Mount (merge)
 Requires=rclone.service
 After=rclone.service
 
 [Service]
 Type=forking
 ExecStart=/usr/local/bin/mergerfs /local:/cloud /merge \
 -o rw,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=auto-full,statfs_ignore=nc,func.getattr=newest,dropcacheonclose=true,nonempty
 KillMode=process
 Restart=on-failure
 User=plex
 Group=plex
 
 [Install]
 WantedBy=multi-user.target
Verify Directory Permissions

Ensure the User that will be running Mergerfs has access to all data directories. Running the command ls -lad /directory/ will show the permissions for that folder. In the example below, the user and group are both plex. Example:

$ ls -lad /cloud
drwxr-xr-x 6 plex plex 24576 Nov 28 21:30 /cloud
$ ls -lad /local
drwxr-xr-x 6 plex plex 24576 Nov 28 21:30 /local
$ ls -lad /merge
drwxr-xr-x 6 plex plex 24576 Nov 28 21:30 /merge
Enabling and starting the Unit Service File

Once you have created merge.service, you will want to enable the service:

sudo systemctl enable merge.service

You are now ready to start Mergerfs. You can do so with the start command:

sudo systemctl start merge.service

If you want to verify Mergerfs is running, you can run the status command:

 $ sudo systemctl status merge.service 
 ● merge.service - Mergerfs Mount (merge)
      Loaded: loaded (/etc/systemd/system/merge.service; enabled; vendor preset: enabled)
      Active: active (running) since Sun 2020-11-15 16:28:26 MST; 2 weeks 4 days ago
    Main PID: 2392484 (mergerfs)
       Tasks: 31 (limit: 76935)
      Memory: 21.9G
      CGroup: /system.slice/merge.service
              └─2392484 /usr/local/bin/mergerfs /local:/cloud /merge -o rw,use_ino,allow_other,func.getattr=newest, >
 Nov 15 16:28:25 systemname systemd[1]: Starting Mergerfs Mount (merge)...
 Nov 15 16:28:26 systemname systemd[1]: Started Mergerfs Mount (merge).

Recommended Plex Server Changes

Increase the Default Cache Size of your Plex DB

With unlimited storage, some servers may run into database locking/timeout issues. Increasing the default cache size could help alleviate this.

  1. Stop Plex
  2. Locate your Plex DB. cd plex/Library/Application Support/Plex Media Server/Plug-in Support/Databases
  3. Run this command: sqlite3 com.plexapp.plugins.library.db
  4. The SQLLite prompt will open up. Type this next: PRAGMA default_cache_size = 6000000; and don't forget the trailing semicolon.
  5. There will be no confirmation that anything happened. Press CTRL + D to exit SqlLite.
  6. Start Plex.