System status
System
Health
Overview
Radarr
This page contains a list of health checks errors. These health checks are periodically performed performed by Radarr and on certain events. The resulting warnings and errors are listed here to give advice on how to resolve them.
Sonarr
This page contains a list of health checks errors. These health checks are periodically performed performed by Sonarr and on certain events. The resulting warnings and errors are listed here to give advice on how to resolve them.
Lidarr
This page contains a list of health checks errors. These health checks are periodically performed performed by Lidarr and on certain events. The resulting warnings and errors are listed here to give advice on how to resolve them.
Readarr
This page contains a list of health checks errors. These health checks are periodically performed performed by Readarr and on certain events. The resulting warnings and errors are listed here to give advice on how to resolve them.
System Warnings
Radarr
- Branch is not a valid release branch
- The branch you have set is not a valid release branch. You will not receive updates. Please change to one of the current release branches.
- Update to .NET Core version
- Newer versions of Radarr are targeted for .NET. We will no longer be providing legacy mono builds after 3.2 is released. You are running one of these legacy builds but your platform supports .NET.
- Fixing Docker installs
- Re-pull your container
- Fixing Standalone installs
- Back-Up your existing configuration before the next step.
- This should only happen on Linux hosts. Do not install .net core runtime or SDK from microsoft. To remedy, download the correct build for your architecture. Please note that the links are for the
master
branch. If you are ondevelop
ornightly
you'll need to adjust/master/
in the URL. - Delete your existing binaries (contents or folder of /opt/Radarr) and replace with the contents of the
.tar.gz
you just downloaded. - DO NOT JUST EXTRACT THE DOWNLOAD OVER THE TOP OF YOUR EXISTING BINARIES.
YOU MUST DELETE THE OLD ONES FIRST.wget --content-disposition 'http://radarr.servarr.com/v1/update/master/updatefile?os=linux&runtime=netcore&arch=x64'
Download the .net binaries. The example is for a x64 (AMD64) installation.- For most users, this would be
.linux-core-x64.tar.gz
selected viaarch=x64
in the url. For ARM usearch=arm
and for ARM64 usearch=arm64
- For most users, this would be
sudo systemctl stop radarr
Stop Radarrsudo mv /opt/Radarr /opt/Radarr.old
Backup the old Binariestar -xvzf Radarr*.linux-core-x64.tar.gz
Extract the Radarr Tarballsudo mv Radarr/ /opt
Move the new Radarr Binariessudo chown -R radarr:radarr /opt/Radarr
Ensure Radarr has permissions to its directory, this assumes it runs as the userradarr
sudo rm -rf /opt/Radarr.old
Remove the old binariessudo rm -rf Radarr*.linux-core-x64.tar.gz
Remove the Tarball- Update your startup script in your systemd (
sudo nano -e /etc/systemd/system/radarr.service
) to callRadarr
instead of calling it with mono likemono --debug Radarr.exe
. In other words you want, as an example,/opt/Radarr/Radarr
and notmono --debug /opt/Radarr/Radarr
.- If Radarr doesn’t start, ensure you have the dependencies listed here installed.
systemctl daemon-reload
Reload the Systemd Filessudo systemctl start radarr.service
Restart Radarr
- Currently installed mono version is old and unsupported
- Radarr is written in .Net and requires Mono to run on very old ARM processors.
- Mono 5.20 is the absolute minimum for Radarr.
- The upgrade procedure for Mono varies per platform.
- Currently installed SQLite version is not supported
- Radarr stores its data in an SQLite database. The sqlite3 library installed on your system is too old. Radarr requires at least version 3.9.0. Note that Radarr uses
libsqlite3.so
which may or may not be contained in a sqlite3 upgrade package.
- Radarr stores its data in an SQLite database. The sqlite3 library installed on your system is too old. Radarr requires at least version 3.9.0. Note that Radarr uses
- New update is available
- Rejoice, the developers have released a new update. This generally means awesome new features and squashed piles of bugs (right?). Apparently you don’t have Auto-Updating enabled, so you’ll have to figure out how to update on your platform. Pressing the Install button on the System -> Updates page is probably a good starting point.
- (This warning will not appear if your current version is less than 14 days old)
- Cannot install update because startup folder is not writable by the user
- This means Radarr will be unable to update itself. You’ll have to update Radarr manually or set the permissions on Radarr’s Startup directory (the installation directory) to allow Radarr to update itself.
- Updating will not be possible to prevent deleting AppData on Update
- Radarr detected that AppData folder for your Operating System is located inside the directory that contains the Radarr binaries. Normally it would be
C:\ProgramData
for Windows and,~/.config
for linux. - Please look at System -> Info to see the current AppData & Startup directories.
- This means Radarr will be unable to update itself without risking data-loss.
- If you’re on linux, you’ll probably have to change the home directory for the user that is running Radarr and copy the current contents of the
~/.config/Radarr
directory to preserve your database.
- Radarr detected that AppData folder for your Operating System is located inside the directory that contains the Radarr binaries. Normally it would be
- Branch is for a previous version
- The update branch setup in Settings/General is for a previous version of Radarr, therefore the instance will not see correct update information in the System/Updates feed and may not receive new updates when released.
- Could not connect to signalR
- signalR drives the dynamic UI updates, so if your browser cannot connect to signalR on your server you won’t see any real time updates in the UI.
- The most common occurrence of this is use of a reverse proxy or cloudflare
- Cloudflare needs websockets enabled.
- Nginx requires the following addition to the location block for the app:
proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $http_connection;
- Make sure you do not include
proxy_set_header Connection "Upgrade";
as suggested by the nginx documentation. THIS WILL NOT WORK - See https://github.com/aspnet/AspNetCore/issues/17081
- Make sure you do not include
- For Apache2 reverse proxy, you need to enable the following modules:
proxy
,proxy_http
, andproxy_wstunnel
. Then, add this websocket tunnel directive to your vhost configuration:
- For Apache2 reverse proxy, you need to enable the following modules:
RewriteEngine On RewriteCond %{HTTP:Upgrade} =websocket [NC] RewriteRule /(.*) ws://127.0.0.1:7878/$1 [P,L]
- For Caddy (V1) use this:
- Note: you'll also need to add the websocket directive to your radarr configuration
- For Caddy (V1) use this:
proxy /radarr 127.0.0.1:7878 { websocket transparent }
- Failed to resolve the IP Address for the Configured Proxy Host
- Review your proxy settings and ensure they are accurate
- Ensure your proxy is up, running, and accessible
- Proxy Failed Test
- Your configured proxy failed to test successfully, review the HTTP error provided and/or check logs for more details.
- System Time is off by more than 1 day
- System time is off by more than 1 day. Scheduled tasks may not run correctly until the time is corrected
- Review your system time and ensure it is synced to an authoritative time server and accurate
- MediaInfo Library Could not be Loaded
- MediaInfo Library could not be loaded.
- PTP Indexer Settings Out of Date
- The following PassThePopcorn indexers have deprecated settings and should be updated.
- Mono Legacy TLS enabled
- Mono 4.x tls workaround still enabled, consider removing MONO_TLS_PROVIDER=legacy environment option
- Mono and x86 builds are ending
- Mono and x86 builds will no longer be supported in the next build of the application. If you are receiving this error then you are running the mono version of the application or the x86 version. Unfortunately, due to increasing difficulting in development support for these legacy versions we will be discontinuing their support and thus releases for them going forward. Thus it is advised you upgrade to a supported Operating System that does not require neither x86 nor mono. You may also be able to explore using Docker for your needs.
Sonarr
- Branch is not a valid release branch
- The branch you have set is not a valid release branch. You will not receive updates. Please change to one of the current release branches.
- Currently installed .Net Framework is old and unsupported
- Sonarr uses the .Net Framework. We need to build Sonarr against the lowest supported version still used by our users. Occasionally we increase the version we build against to be able to utilize new features. Apparently you haven't applied the appropriate Windows updates in a while and need to upgrade .Net to be able to use newer versions of Sonarr.
- Upgrading the .Net Framework is very straightforward on Windows, although it often requires a restart. Please follow the instructions here.
- Currently installed .Net Framework is supported but upgrading is recommended
- Sonarr uses the .Net Framework. We need to build Sonarr against the lowest supported version still used by our users. Upgrading to newer versions allows us to build against newer versions and use new Framework features.
- Upgrading the .Net Framework is very straightforward on Windows, although it often requires a restart. Please follow the instructions here.
- Currently installed mono version is old and unsupported
- Sonarr is written in .Net and requires Mono to run. Various versions of Sonarr have different minimum versions of Mono to operate correctly. The ideal version of Mono varies per platform.
- Mono 5.8 is the absolute minimum for Sonarr, but Mono 5.20 is currently recommended.
- The upgrade procedure for Mono varies per platform.
- Sonarr is written in .Net and requires Mono to run. Various versions of Sonarr have different minimum versions of Mono to operate correctly. The ideal version of Mono varies per platform.
- Currently installed mono version is supported but upgrading is recommended
- Sonarr uses the .Net Framework which Mono implements for your system. We need to build Sonarr against the lowest supported version still used by our users. Upgrading to newer versions allows us to build against newer versions and use new Framework features.
- The upgrade procedure for Mono varies per platform.
- New update is available
- Rejoice, the developers have released a new update. This generally means awesome new features and squashed piles of bugs (right?). Apparently you don't have Auto-Updating enabled, so you'll have to figure out how to update on your platform. Pressing the Install button on the System -> Updates page is probably a good starting point. But while you're at it, read the change log to find out what the relevant changes were.
- (This warning will not appear if your current version is less than 14 days old)
- Cannot install update because startup folder is not writable by the user
- This means Sonarr will be unable to update itself. You'll have to update Sonarr manually or set the permissions on Sonarr's Startup directory (the installation directory) to allow Sonarr to update itself.
- Updating will not be possible to prevent deleting AppData on Update
- Sonarr detected that AppData folder for your Operating System is located inside the directory that contains the Sonarr binaries. Normally it would be
C:\ProgramData
for Windows and,~/.config
for linux. - Please look at System -> About to see the current AppData & Startup directories.
- This means Sonarr will be unable to update itself without risking data-loss.
- If you're on linux, you'll probably have to change the home directory for the user that is running Sonarr and copy the current contents of the
~/.config/Sonarr
directory to preserve your database.
- Sonarr detected that AppData folder for your Operating System is located inside the directory that contains the Sonarr binaries. Normally it would be
- Package Maintainer Message
- Please refer to the specific message your package maintainer is indicating to you. This is not a Sonarr issue. For additional information, refer to your package maintainer. Your package maintainer can be found in System -> Status -> About. Note that this includes docker and your package maintainer is whomever maintains your docker image.
- Failed to resolve the IP Address for the Configured Proxy Host
- Review your proxy settings and ensure they are accurate
- Ensure your proxy is up, running, and accessible
- Proxy Failed Test
- Your configured proxy failed to test successfully, review the HTTP error provided and/or check logs for more details.
- System Time is off by more than 1 day
- System time is off by more than 1 day. Scheduled tasks may not run correctly until the time is corrected
- Review your system time and ensure it is synced to an authoritative time server and accurate
- MediaInfo Library Could not be Loaded
- MediaInfo Library could not be loaded.
- Mono Legacy TLS enabled
- Mono 4.x tls workaround still enabled, consider removing MONO_TLS_PROVIDER=legacy environment option
Lidarr
- Branch is not a valid release branch
- The branch you have set is not a valid release branch. You will not receive updates. Please change to one of the current release branches.
- Update to .NET Core version
- Newer versions of Lidarr are targeted for .NET. We will soon no longer provide legacy mono builds for those platforms that cannot use .NET. You are running one of these legacy builds but your platform supports .NET.
- Fixing Docker installs
- Re-pull your container
- Fixing Standalone installs
- Back-Up your existing configuration before the next step.
- This should only happen on Linux hosts. Do not install .net core runtime or SDK from microsoft. To remedy, download the correct build for your architecture. Please note that the links are for the
develop
branch. If you are onnightly
you'll need to adjust/develop/
in the URL. - Delete your existing binaries (contents or folder of /opt/Lidarr) and replace with the contents of the
.tar.gz
you just downloaded. - DO NOT JUST EXTRACT THE DOWNLOAD OVER THE TOP OF YOUR EXISTING BINARIES.
YOU MUST DELETE THE OLD ONES FIRSTwget --content-disposition 'http://lidarr.servarr.com/v1/update/master/updatefile?os=linux&runtime=netcore&arch=x64'
Download the .net binaries. The example is for a x64 (AMD64) installation.- For most users, this would be
.linux-core-x64.tar.gz
selected viaarch=x64
in the url. For ARM usearch=arm
and for ARM64 usearch=arm64
- For most users, this would be
sudo systemctl stop lidarr.service
Stop Lidarrsudo mv /opt/Lidarr /opt/Lidarr.old
Backup the old Binariestar -xvzf Lidarr*.linux-core-x64.tar.gz
Extract the Lidarr Tarballsudo mv Lidarr/ /opt
Move the new Lidarr Binariessudo chown -R lidarr:lidarr /opt/Lidarr
Ensure Lidarr has permissions to its directory, this assumes it runs as the userlidarr
sudo rm -rf /opt/Lidarr.old
Remove the old binariessudo rm -rf Lidarr*.linux-core-x64.tar.gz
Remove the Tarball- Update your startup script (
sudo nano -e /etc/systemd/system/lidarr.service
) to callLidarr
instead of calling it with mono likemono --debug Lidarr.exe
. In other words you want, as an example,/opt/Lidarr/Lidarr
and notmono --debug /opt/Lidarr/Lidarr
.- If Lidarr doesn’t start, ensure you have the dependencies listed here installed
systemctl daemon-reload
Reload the Systemd Filessudo systemctl start lidarr.service
Restart Lidarr
- Mono version is less than 5.8, upgrade for improved stability
- Lidarr is written in .Net and requires Mono to run on very old ARM processors.
- Mono 5.20 is the absolute minimum for Lidarr.
- The upgrade procedure for Mono varies per platform..
- See "Update to .NET Core version above"
- New update is available
- Rejoice, the developers have released a new update. This generally means awesome new features and squashed piles of bugs (right?). Apparently you don’t have Auto-Updating enabled, so you’ll have to figure out how to update on your platform. Pressing the Install button on the System -> Updates page is probably a good starting point.
- (This warning will not appear if your current version is less than 14 days old)
- Cannot install update because startup folder is not writable by the user
- This means Lidarr will be unable to update itself. You’ll have to update Lidarr manually or set the permissions on Lidarr Startup directory (the installation directory) to allow Lidarr to update itself.
- Branch is for a previous version
- The update branch setup in Settings/General is for a previous version of Lidarr, therefore the instance will not see correct update information in the System/Updates feed and may not receive new updates when released.
- Could not connect to signalR
- signalR drives the dynamic UI updates, so if your browser cannot connect to signalR on your server you won’t see any real time updates in the UI.
- The most common occurrence of this is use of a reverse proxy or cloudflare
- Cloudflare needs websockets enabled.
- Nginx requires the following addition to the location block for the app:
proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $http_connection;
- Make sure you do not include
proxy_set_header Connection "Upgrade";
as suggested by the nginx documentation. THIS WILL NOT WORK - See https://github.com/aspnet/AspNetCore/issues/17081
- For Apache2 reverse proxy, you need to enable the following modules:
proxy
,proxy_http
, andproxy_wstunnel
. Then, add this websocket tunnel directive to your vhost configuration:
- Make sure you do not include
RewriteEngine On RewriteCond %{HTTP:Upgrade} =websocket [NC] RewriteRule /(.*) ws://127.0.0.1:8686/$1 [P,L]
Lidarr can use chromaprint audio fingerprinting to identify tracks. This depends on an external binary, which is distributed with Lidarr for Windows and macOS, but must be provided independently on Linux.
To fix this on a native Linux instance, install the appropriate package using your package manager and make sure that fpcalc is on your PATH (this can be checked using which fpcalc and verifying that the correct location of fpcalc is returned):
Distribution | Package |
---|---|
Debian/Ubuntu | libchromaprint-tools
|
Fedora/CentOS | chromaprint-tools
|
Arch | chromaprint
|
OpenSUSE | chromaprint-fpcalc
|
Synology | chromaprint
|
- Failed to resolve the IP Address for the Configured Proxy Host
- Review your proxy settings and ensure they are accurate
- Ensure your proxy is up, running, and accessible
- Proxy Failed Test
- Your configured proxy failed to test successfully, review the HTTP error provided and/or check logs for more details.
- System Time is off by more than 1 day
- System time is off by more than 1 day. Scheduled tasks may not run correctly until the time is corrected
- Review your system time and ensure it is synced to an authoritative time server and accurate
- MediaInfo Library Could not be Loaded
- MediaInfo Library could not be loaded.
- Mono Legacy TLS enabled
- Mono 4.x tls workaround still enabled, consider removing MONO_TLS_PROVIDER=legacy environment option
Readarr
- Branch is not a valid release branch
- The branch you have set is not a valid release branch. You will not receive updates. Please change to one of the current release branches.
- Update to .NET Core version
- Newer versions of Readarr are targeted for .NET. We will soon no longer provide legacy mono builds for those platforms that cannot use .NET. You are running one of these legacy builds but your platform supports .NET Core.
- Fixing Docker installs
- Re-pull your container
- Fixing Standalone installs
- Back-Up your existing configuration before the next step.
- This should only happen on Linux hosts. Do not install .net core runtime or SDK from microsoft. To remedy, download the correct build for your architecture. Please note that the links are for the
master
branch. If you are ondevelop
ornightly
you'll need to adjust/master/
in the URL. - Delete your existing binaries (contents or folder of /opt/Readarr) and replace with the contents of the
.tar.gz
you just downloaded. - DO NOT JUST EXTRACT THE DOWNLOAD OVER THE TOP OF YOUR EXISTING BINARIES.
YOU MUST DELETE THE OLD ONES FIRST.wget --content-disposition 'http://readarr.servarr.com/v1/update/master/updatefile?os=linux&runtime=netcore&arch=x64'
Download the .net binaries. The example is for a x64 (AMD64) installation.- For most users, this would be
.linux-core-x64.tar.gz
selected viaarch=x64
in the url. For ARM usearch=arm
and for ARM64 usearch=arm64
- For most users, this would be
sudo systemctl stop readarr
Stop Readarrsudo mv /opt/Readarr /opt/Readarr.old
Backup the old Binariestar -xvzf Readarr*.linux-core-x64.tar.gz
Extract the Readarr Tarballsudo mv Readarr/ /opt
Move the new Readarr Binariessudo chown -R readarr:readarr /opt/Readarr
Ensure Readarr has permissions to its directory, this assumes it runs as the userreadarr
sudo rm -rf /opt/Readarr.old
Remove the old binariessudo rm -rf Readarr*.linux-core-x64.tar.gz
Remove the Tarball- Update your startup script (
sudo nano -e /etc/systemd/system/readarr.service
) to callReadarr
instead of calling it with mono likemono --debug Readarr.exe
. In other words you want, as an example,/opt/Readarr/Readarr
and notmono --debug /opt/Readarr/Readarr
.- If Readarr doesn’t start, ensure you have the dependencies listed here installed.
systemctl daemon-reload
Reload the Systemd Filessudo systemctl start readarr.service
Restart Readarr
- Mono version is less than 5.2, upgrade for improved stability
- Readarr is written in .Net and requires Mono to run on very old ARM processors.
- Mono 5.20 is the absolute minimum for Readarr.
- The upgrade procedure for Mono varies per platform.
- See "Update to .NET Core version above"
- New update is available
- Rejoice, the developers have released a new update. This generally means awesome new features and squashed piles of bugs (right?). Apparently you don’t have Auto-Updating enabled, so you’ll have to figure out how to update on your platform. Pressing the Install button on the System -> Updates page is probably a good starting point.
- (This warning will not appear if your current version is less than 14 days old)
- Cannot install update because startup folder is not writable by the user
- This means Lidarr will be unable to update itself. You’ll have to update Lidarr manually or set the permissions on Lidarr Startup directory (the installation directory) to allow Lidarr to update itself.
- Branch is for a previous version
- The update branch setup in Settings/General is for a previous version of Lidarr, therefore the instance will not see correct update information in the System/Updates feed and may not receive new updates when released.
- Could not connect to signalR
- signalR drives the dynamic UI updates, so if your browser cannot connect to signalR on your server you won’t see any real time updates in the UI.
- The most common occurrence of this is use of a reverse proxy or cloudflare
- Cloudflare needs websockets enabled.
- Nginx requires the following addition to the location block for the app:
proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $http_connection;
- Make sure you do not include
proxy_set_header Connection "Upgrade";
as suggested by the nginx documentation. THIS WILL NOT WORK - See https://github.com/aspnet/AspNetCore/issues/17081
- For Apache2 reverse proxy, you need to enable the following modules:
proxy
,proxy_http
, andproxy_wstunnel
. Then, add this websocket tunnel directive to your vhost configuration:
- Make sure you do not include
RewriteEngine On RewriteCond %{HTTP:Upgrade} =websocket [NC] RewriteRule /(.*) ws://127.0.0.1:8787/$1 [P,L]
- Failed to resolve the IP Address for the Configured Proxy Host
- Review your proxy settings and ensure they are accurate
- Ensure your proxy is up, running, and accessible
- Proxy Failed Test
- Your configured proxy failed to test successfully, review the HTTP error provided and/or check logs for more details.
- System Time is off by more than 1 day
- System time is off by more than 1 day. Scheduled tasks may not run correctly until the time is corrected
- Review your system time and ensure it is synced to an authoritative time server and accurate
- MediaInfo Library Could not be Loaded
- MediaInfo Library could not be loaded.
- Mono Legacy TLS enabled
- Mono 4.x tls workaround still enabled, consider removing MONO_TLS_PROVIDER=legacy environment option
Download Clients
Radarr
- No download client is available
- A properly configured and enabled download client is required for Radarr to be able to download media. Since Radarr supports different download clients, you should determine which best matches your requirements. If you already have a download client installed, you should configure Radarr to use it and create a category. See Settings -> Download Client.
- Unable to communicate with download client
- Radarr was unable to communicate with the configured download client. Please verify if the download client is operational and double check the url. This could also indicate an authentication error.
- This is typically due to improperly configured download client. Things you can typically check:
- Your download clients IP Address if its on the same bare metal machine this is typically
127.0.0.1
- The Port number of that your download client is using these are filled out with the default port number but if you've changed it you'll need to have the same one entered into Radarr.
- Ensure SSL encryption is not turned on if you're using both your Radarr instance and your download client on a local network. See the SSL FAQ entry for more information.
- Your download clients IP Address if its on the same bare metal machine this is typically
- One or more of your download clients is not responding to requests made by Radarr. Therefore Radarr has decided to temporarily stop querying the download client on it’s normal 1 minute cycle, which is normally used to track active downloads and import finished ones. However, Radarr will continue to attempt to send downloads to the client, but will in all likeliness fail.
- You should inspect System->Logs to see what the reason is for the failures.
- If you no longer use this download client, disable it in Radarr to prevent the errors.
- Enable Completed Download Handling
- Radarr requires Completed Download Handling to be able to import files that were downloaded by the download client. It is recommended to enable Completed Download Handling.
- (Completed Download Handling is enabled by default for new users.)
- Docker bad remote path mapping
- This error is typically associated with bad docker paths within either your download client or Radarr
- An example of this would be:
- Download client:
Download Path: /downloads:/mnt/user/downloads
- Radarr:
Download Path: /data:/mnt/user/downloads
- Within this example the download client places its downloads into
/downloads
and therefore tells Radarr when its complete that the finished movie is in/downloads
. Radarr then comes along and says "Okay, cool, let me check in/downloads
" Well, inside Radarr you did not allocate a/downloads
path you allocated a/data
path so it throws this error. - The easiest fix for this is CONSISTENCY if you use one scheme in your download client, use it across the board.
- Team Radarr is a big fan of simply using
/data
.- Download client:
/data:/mnt/user/data
- Radarr:
/data:/mnt/user/data
- Now within the download client you can specify where in
/data
you'd like to place your downloads, now this varies depending on the client but you should be able to tell it "Yeah download client place my files into."/data/torrents (or usenet)/movies
and since you used/data
in Radarr when the download client tells Radarr it's done Radarr will come along and say "Sweet, I have a/data
and I also can see/torrents (or usenet)/movies
all is right in the world."
- Download client:
- Download client:
- There are many great write ups by some very talented people one on our wiki Docker Guide and the other by TRaSH with his How To Set Up Hardlinks and Atomic-Moves Now these guides place heavy emphasis on Hardlinks and Atomic moves, but the general concept of containers and how path mapping works is the core of these discussions.
- An example of this would be:
- This error is typically associated with bad docker paths within either your download client or Radarr
See TRaSH's Remote Path Guide for more information.
- Downloading into Root Folder
- Within the application, a root folder is defined as the configured media library folder. You're downloading directly into your root (library) folder. This frequently causes issues and is not advised. To fix this change your download client so it is not placing downloads within your root folder. Please note that this check looks at all defined/configured root folders added not only root folders currently in use.
- Bad Download Client Settings
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map.
- Bad Remote Path Mapping
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map. See TRaSH's Remote Path Guide for more information.
- Permissions Error
- Radarr or the user radarr is running as cannot access the location your download client is downloading files to. This is typically a permission issue.
- Remote File was removed part way through processing
- A file accessible via a remote path map appears to have been removed prior to processing completing.
- Remote Path is Used and Import Failed
- Check your logs for more info; Refer to our Troubleshooting Guides
Sonarr
- No download client is available
- A properly configured and enabled download client is required for Sonarr to be able to download media. Since Sonarr supports different download clients, you should determine which best matches your requirements. If you already have a download client installed, you should configure Sonarr to use it and create a category. See Settings -> Download Client.
- Unable to communicate with download client
- Sonarr was unable to communicate with the configured download client. Please verify if the download client is operational and double check the url. This could also indicate an authentication error.
- This is typically due to improperly configured download client. Things you can typically check:
- Your download clients IP Address if its on the same bare metal machine this is typically
127.0.0.1
- The Port number of that your download client is using these are filled out with the default port number but if you've changed it you'll need to have the same one entered into Sonarr.
- Ensure SSL encryption is not turned on if you're using both your Sonarr instance and your download client on a local network. See the SSL FAQ entry for more information.
- Your download clients IP Address if its on the same bare metal machine this is typically
- One or more of your download clients is not responding to requests made by Sonarr. Therefore Sonarr has decided to temporarily stop querying the download client on it's normal 1 minute cycle, which is normally used to track active downloads and import finished ones. However, Sonarr will continue to attempt to send downloads to the client, but will in all likeliness fail.
- You should inspect System->Logs to see what the reason is for the failures.
- If you no longer use this download client, disable it in Sonarr to prevent the errors.
- Downloading into Root Folder
- Within the application, a root folder is defined as the configured media library folder. You're downloading directly into your root (library) folder. This frequently causes issues and is not advised. To fix this change your download client so it is not placing downloads within your root folder. Please note that this check looks at all defined/configured root folders added not only root folders currently in use.
- Bad Download Client Settings
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map.
- Bad Remote Path Mapping
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map. See TRaSH's Remote Path Guide for more information.
- Permissions Error
- Sonarr or the user sonarr is running as cannot access the location your download client is downloading files to. This is typically a permission issue.
- Remote File was removed part way through processing
- A file accessible via a remote path map appears to have been removed prior to processing completing.
- Remote Path is Used and Import Failed
- Check your logs for more info; Refer to our Troubleshooting Guides
Lidarr
- No download client is available
- A properly configured and enabled download client is required for Lidarr to be able to download media. Since Lidarr supports different download clients, you should determine which best matches your requirements. If you already have a download client installed, you should configure Lidarr to use it and create a category. See Settings -> Download Client.
- Unable to communicate with download client
- Lidarr was unable to communicate with the configured download client. Please verify if the download client is operational and double check the url. This could also indicate an authentication error.
- This is typically due to improperly configured download client. Things you can typically check:
- Your download clients IP Address if its on the same bare metal machine this is typically
127.0.0.1
- The Port number of that your download client is using these are filled out with the default port number but if you've changed it you'll need to have the same one entered into Lidarr.
- Ensure SSL encryption is not turned on if you're using both your Lidarr instance and your download client on a local network. See the SSL FAQ entry for more information.
- Your download clients IP Address if its on the same bare metal machine this is typically
- One or more of your download clients is not responding to requests made by Lidarr. Therefore Lidarr has decided to temporarily stop querying the download client on it’s normal 1 minute cycle, which is normally used to track active downloads and import finished ones. However, Lidarr will continue to attempt to send downloads to the client, but will in all likeliness fail.
- You should inspect System->Logs to see what the reason is for the failures.
- If you no longer use this download client, disable it in Lidarr to prevent the errors.
- Enable Completed Download Handling
- Lidarr requires Completed Download Handling to be able to import files that were downloaded by the download client. It is recommended to enable Completed Download Handling.
- (Completed Download Handling is enabled by default for new users.)
- Docker bad remote path mapping
- This error is typically associated with bad docker paths within either your download client or Lidarr
- An example of this would be:
- Download client:
Download Path: /downloads:/mnt/user/downloads
- Lidarr:
Download Path: /data:/mnt/user/downloads
- Within this example the download client places its downloads into
/downloads
and therefore tells Lidarr when its complete that the finished song is in/downloads
. Lidarr then comes along and says "Okay, cool, let me check in/downloads
" Well, inside Lidarr you did not allocate a/downloads
path you allocated a/data
path so it throws this error. - The easiest fix for this is CONSISTENCY if you use one scheme in your download client, use it across the board.
- Team Lidarr is a big fan of simply using
/data
.- Download client:
/data:/mnt/user/data
- Lidarr:
/data:/mnt/user/data
- Now within the download client you can specify where in
/data
you'd like to place your downloads, now this varies depending on the client but you should be able to tell it "Yeah download client place my files into."/data/torrents (or usenet)/audio
and since you used/data
in Lidarr when the download client tells Lidarr it's done Lidarr will come along and say "Sweet, I have a/data
and I also can see/torrents (or usenet)/audio
all is right in the world."
- Download client:
- Download client:
- There are many great write ups by some very talented people one on our wiki Docker Guide and the other by TRaSH with his How To Set Up Hardlinks and Atomic-Moves Now these guides place heavy emphasis on Hardlinks and Atomic moves, but the general concept of containers and how path mapping works is the core of these discussions.
- An example of this would be:
- This error is typically associated with bad docker paths within either your download client or Lidarr
- Downloading into Root Folder
- Within the application, a root folder is defined as the configured media library folder. You're downloading directly into your root (library) folder. This frequently causes issues and is not advised. To fix this change your download client so it is not placing downloads within your root folder. Please note that this check looks at all defined/configured root folders added not only root folders currently in use.
- Bad Download Client Settings
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map.
- Bad Remote Path Mapping
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map. See TRaSH's Remote Path Guide for more information. The link is for Radarr, but the same concept applies.
- Permissions Error
- Lidarr or the user lidarr is running as cannot access the location your download client is downloading files to. This is typically a permission issue.
- Remote File was removed part way through processing
- A file accessible via a remote path map appears to have been removed prior to processing completing.
- Remote Path is Used and Import Failed
- Check your logs for more info; Refer to our Troubleshooting Guides
Readarr
- No download client is available
- A properly configured and enabled download client is required for Readarr to be able to download media. Since Readarr supports different download clients, you should determine which best matches your requirements. If you already have a download client installed, you should configure Lidarr to use it and create a category. See Settings -> Download Client.
- Unable to communicate with download client
- Readarr was unable to communicate with the configured download client. Please verify if the download client is operational and double check the url. This could also indicate an authentication error.
- This is typically due to improperly configured download client. Things you can typically check:
- Your download clients IP Address if its on the same bare metal machine this is typically
127.0.0.1
- The Port number of that your download client is using these are filled out with the default port number but if you've changed it you'll need to have the same one entered into Readarr.
- Ensure SSL encryption is not turned on if you're using both your Readarr instance and your download client on a local network. See the SSL FAQ entry for more information.
- Your download clients IP Address if its on the same bare metal machine this is typically
- One or more of your download clients is not responding to requests made by Readarr. Therefore Readarr has decided to temporarily stop querying the download client on it’s normal 1 minute cycle, which is normally used to track active downloads and import finished ones. However, Readarr will continue to attempt to send downloads to the client, but will in all likeliness fail.
- You should inspect System->Logs to see what the reason is for the failures.
- If you no longer use this download client, disable it in Readarr to prevent the errors.
- Enable Completed Download Handling
- Readarr requires Completed Download Handling to be able to import files that were downloaded by the download client. It is recommended to enable Completed Download Handling.
- (Completed Download Handling is enabled by default for new users.)
- Docker bad remote path mapping
- This error is typically associated with bad docker paths within either your download client or Readarr
- An example of this would be:
- Download client:
Download Path: /downloads:/mnt/user/downloads
- Readarr:
Download Path: /data:/mnt/user/downloads
- Within this example the download client places its downloads into
/downloads
and therefore tells Radarr when its complete that the finished book is in/downloads
. Readarr then comes along and says "Okay, cool, let me check in/downloads
" Well, inside Readarr you did not allocate a/downloads
path you allocated a/data
path so it throws this error. - The easiest fix for this is CONSISTENCY if you use one scheme in your download client, use it across the board.
- Team Readarr is a big fan of simply using
/data
.- Download client:
/data:/mnt/user/data
- Readarr:
/data:/mnt/user/data
- Now within the download client you can specify where in
/data
you'd like to place your downloads, now this varies depending on the client but you should be able to tell it "Yeah download client place my files into."/data/torrents (or usenet)/books
and since you used/data
in Readarr when the download client tells Readarr it's done Readarr will come along and say "Sweet, I have a/data
and I also can see/torrents (or usenet)/books
all is right in the world."
- Download client:
- Download client:
- There are many great write ups by some very talented people one on our wiki Docker Guide and the other by TRaSH with his How To Set Up Hardlinks and Atomic-Moves Now these guides place heavy emphasis on Hardlinks and Atomic moves, but the general concept of containers and how path mapping works is the core of these discussions.
- An example of this would be:
- This error is typically associated with bad docker paths within either your download client or Readarr
- Downloading into Root Folder
- Within the application, a root folder is defined as the configured media library folder. You're downloading directly into your root (library) folder. This frequently causes issues and is not advised. To fix this change your download client so it is not placing downloads within your root folder. Please note that this check looks at all defined/configured root folders added not only root folders currently in use.
- Bad Download Client Settings
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map.
- Bad Remote Path Mapping
- The location your download client is downloading files to is causing problems. Check the logs for further information. This may be permissions or attempting to go from windows to linux or linux to windows without a remote path map. See TRaSH's Remote Path Guide for more information. The link is for Radarr, but the same concept applies.
- Permissions Error
- Readarr or the user readarr is running as cannot access the location your download client is downloading files to. This is typically a permission issue.
- Remote File was removed part way through processing
- A file accessible via a remote path map appears to have been removed prior to processing completing.
- Remote Path is Used and Import Failed
- Check your logs for more info; Refer to our Troubleshooting Guides
Completed/Failed Download Handling
Radarr
- Completed Download Handling is disabled
- (This warning is only generated for existing users before when the Completed Download Handling feature was implemented. This feature is disabled by default to ensure the system continued to operate as expected for current configurations.)
- It’s recommended to use Completed Download Handling since it provides better compatibility for the unpacking and post-processing logic of various download clients. With it, Radarr will only import a download once the download client reports it as ready.
- If you wish to enable Completed Download Handling you should verify the following: * Warning: Completed Download Handling only works properly if the download client and Radarr are on the same machine since it gets the path to be imported directly from the download client otherwise a remote map is needed.
Sonarr
- Completed Download Handling is disabled
- (This warning is only generated for existing users before when the Completed Download Handling feature was implemented. This feature is disabled by default to ensure the system continued to operate as expected for current configurations.)
- It’s recommended to use Completed Download Handling since it provides better compatibility for the unpacking and post-processing logic of various download clients. With it, Sonarr will only import a download once the download client reports it as ready.
- If you wish to enable Completed Download Handling you should verify the following: * Warning: Completed Download Handling only works properly if the download client and Sonarr are on the same machine since it gets the path to be imported directly from the
Lidarr
- Completed Download Handling is disabled
- (This warning is only generated for existing users before when the Completed Download Handling feature was implemented. This feature is disabled by default to ensure the system continued to operate as expected for current configurations.)
- It’s recommended to use Completed Download Handling since it provides better compatibility for the unpacking and post-processing logic of various download clients. With it, Lidarr will only import a download once the download client reports it as ready.
- If you wish to enable Completed Download Handling you should verify the following: * Warning: Completed Download Handling only works properly if the download client and Lidrr are on the same machine since it gets the path to be imported directly from the download client otherwise a remote map is needed.
Readarr
- Completed Download Handling is disabled
- (This warning is only generated for existing users before when the Completed Download Handling feature was implemented. This feature is disabled by default to ensure the system continued to operate as expected for current configurations.)
- It’s recommended to use Completed Download Handling since it provides better compatibility for the unpacking and post-processing logic of various download clients. With it, Readarr will only import a download once the download client reports it as ready.
- If you wish to enable Completed Download Handling you should verify the following: * Warning: Completed Download Handling only works properly if the download client and Readarr are on the same machine since it gets the path to be imported directly from the download client otherwise a remote map is needed.
Indexers
Radarr
- No indexers available with automatic search enabled, Radarr will not provide any automatic search results
- Simply put you do not have any of your indexers set to allow automatic searches
- Go into Settings > Indexers, select an indexer you'd like to allow Automatic Searches and then click save.
- Simply put you do not have any of your indexers set to allow automatic searches
- No indexers available with RSS sync enabled, Radarr will not grab new releases automatically
- So Radarr uses the RSS feed to pick up new releases as they come along. More info on that here
- To correct this issue go to Settings > Indexers, select an indexer you have and enable RSS Sync
- No indexers are enabled
- Radarr requires indexers to be able to discover new releases. Please read the wiki on instructions how to add indexers.
- Enabled indexers do not support searching
- None of the indexers you have enabled support searching. This means Radarr will only be able to find new releases via the RSS feeds. But searching for movies (either Automatic Search or Manual Search) will never return any results. Obviously, the only way to remedy it is to add another indexer.
- No indexers avaiable with Interactive Search Enabled"
- None of the indexers you have enabled support interactive searching. This means the application will only be able to find new releases via the RSS feeds or an automatic search.
- Errors occurs while Radarr tried to use one of your indexers. To limit retries, Radarr will not use the indexer for an increasing amount of time (up to 24h).
- This mechanism is triggered if Radarr was unable to get a response from the indexer (could be dns, connection, authentication or indexer issue), or unable to fetch the nzb/torrent file from the indexer. Please inspect the logs to determine what kind of error causes the problem.
- You can prevent the warning by disabling the affected indexer.
- Run the Test on the indexer to force Radarr to recheck the indexer, please note that the Health Check warning will not always disappear immediately.
Sonarr
- No indexers available with automatic search enabled, Sonarr will not provide any automatic search results
- Simply put you do not have any of your indexers set to allow automatic searches
- Go into Settings > Indexers, select an indexer you'd like to allow Automatic Searches and then click save.
- Simply put you do not have any of your indexers set to allow automatic searches
- No indexers available with RSS sync enabled, Sonarr will not grab new releases automatically
- So Sonarr uses the RSS feed to pick up new releases as they come along. More info on that here
- To correct this issue go to Settings > Indexers, select an indexer you have and enable RSS Sync
- No indexers are enabled
- Sonarr requires indexers to be able to discover new releases. Please read the wiki on instructions how to add indexers.
- Enabled indexers do not support searching
- None of the indexers you have enabled support searching. This means Sonarr will only be able to find new releases via the RSS feeds. But searching for episodes (either Automatic Search or Manual Search) will never return any results. Obviously, the only way to remedy it is to add another indexer.
- No indexers avaiable with Interactive Search Enabled"
- None of the indexers you have enabled support interactive searching. This means the application will only be able to find new releases via the RSS feeds or an automatic search.
- Errors occurs while Sonarr tried to use one of your indexers. To limit retries, Sonarr will not use the indexer for an increasing amount of time (up to 24h).
- This mechanism is triggered if Sonarr was unable to get a response from the indexer (could be dns, connection, authentication or indexer issue), or unable to fetch the nzb/torrent file from the indexer. Please inspect the logs to determine what kind of error causes the problem.
- You can prevent the warning by disabling the affected indexer.
- Run the Test on the indexer to force Sonarr to recheck the indexer, please note that the Health Check warning will not always disappear immediately.
Lidarr
- No indexers available with automatic search enabled, Lidarr will not provide any automatic search results
- Simply put you do not have any of your indexers set to allow automatic searches
- Go into Settings > Indexers, select an indexer you'd like to allow Automatic Searches and then click save.
- Simply put you do not have any of your indexers set to allow automatic searches
- No indexers available with RSS sync enabled, Lidarr will not grab new releases automatically
- So Lidarr uses the RSS feed to pick up new releases as they come along. More info on that here
- To correct this issue go to Settings > Indexers, select an indexer you have and enable RSS Sync
- No indexers are enabled
- Lidarr requires indexers to be able to discover new releases. Please read the wiki on instructions how to add indexers.
- Enabled indexers do not support searching
- None of the indexers you have enabled support searching. This means Lidarr will only be able to find new releases via the RSS feeds. But searching for music (either Automatic Search or Manual Search) will never return any results. Obviously, the only way to remedy it is to add another indexer.
- No indexers avaiable with Interactive Search Enabled"
- None of the indexers you have enabled support interactive searching. This means the application will only be able to find new releases via the RSS feeds or an automatic search.
- Errors occurs while Lidarr tried to use one of your indexers. To limit retries, Lidarr will not use the indexer for an increasing amount of time (up to 24h).
- This mechanism is triggered if Lidarr was unable to get a response from the indexer (could be dns, connection, authentication or indexer issue), or unable to fetch the nzb/torrent file from the indexer. Please inspect the logs to determine what kind of error causes the problem.
- You can prevent the warning by disabling the affected indexer.
- Run the Test on the indexer to force Lidarr to recheck the indexer, please note that the Health Check warning will not always disappear immediately.
Readarr
- No indexers available with automatic search enabled, Readarr will not provide any automatic search results
- Simply put you do not have any of your indexers set to allow automatic searches
- Go into Settings > Indexers, select an indexer you'd like to allow Automatic Searches and then click save.
- Simply put you do not have any of your indexers set to allow automatic searches
- No indexers available with RSS sync enabled, Readarr will not grab new releases automatically
- So Readarr uses the RSS feed to pick up new releases as they come along. More info on that here
- To correct this issue go to Settings > Indexers, select an indexer you have and enable RSS Sync
- No indexers are enabled
- Readarr requires indexers to be able to discover new releases. Please read the wiki on instructions how to add indexers.
- Enabled indexers do not support searching
- None of the indexers you have enabled support searching. This means Readarr will only be able to find new releases via the RSS feeds. But searching for books (either Automatic Search or Manual Search) will never return any results. Obviously, the only way to remedy it is to add another indexer.
- No indexers avaiable with Interactive Search Enabled"
- None of the indexers you have enabled support interactive searching. This means the application will only be able to find new releases via the RSS feeds or an automatic search.
- Errors occurs while Readarr tried to use one of your indexers. To limit retries, Readarr will not use the indexer for an increasing amount of time (up to 24h).
- This mechanism is triggered if Readarr was unable to get a response from the indexer (could be dns, connection, authentication or indexer issue), or unable to fetch the nzb/torrent file from the indexer. Please inspect the logs to determine what kind of error causes the problem.
- You can prevent the warning by disabling the affected indexer.
- Run the Test on the indexer to force Readarr to recheck the indexer, please note that the Health Check warning will not always disappear immediately.
Folders
Radarr
- Missing root folder
- This error is typically identified if a Movie is looking for a root folder but that root folder is no longer available.
- If you would like to remove this warning simply find the movie that is still using the old root folder and edit it to the correct root Folder
- Easiest way to find this is to go to the Movies (Library) Tab
- Create a custom filter with the old root folder path
- Select mass edit on the top bar and from the Root Paths drop down select the new root path that you want these movies to be moved to.
- Next you'll receive a pop-up that states Would you like to move the movie folders to '<root path>' ? This will also state This will also rename the movie folder per the movie folder format in settings. Simply select No if the you do not want Radarr to move your files
- If you would like to remove this warning simply find the movie that is still using the old root folder and edit it to the correct root Folder
- This error is typically identified if a Movie is looking for a root folder but that root folder is no longer available.
Sonarr
- Missing root folder
- This error is typically identified if a series is looking for a root folder but that root folder is no longer available.
- If you would like to remove this warning simply find the series that is still using the old root folder and edit it to the correct root folder
- Go to the Series > Mass Editor Tab
- Create a custom filter with the old root folder path
- Once the series have been found find the Root Paths drop down and select the new root path that you want these series to be moved to.
- Next you'll receive a pop-up that states Would you like to move the series folders to '<root path>'? Simply select No if the you do not want Sonarr to move your files
- If you would like to remove this warning simply find the series that is still using the old root folder and edit it to the correct root folder
- This error is typically identified if a series is looking for a root folder but that root folder is no longer available.
- Import List missing root folder
- This error is typically identified if a list is looking for a root folder but that root folder is no longer available.
- Go to Settings > Import Lists
- Edit the import lists that were mentioned in the health check
- Save
- This error is typically identified if a list is looking for a root folder but that root folder is no longer available.
Lidarr
- Missing root folder
- This error is typically identified if an artist is looking for a root folder but that root folder is no longer available.
- If you would like to remove this warning simply find the artist that is still using the old root folder and edit it to the correct root folder
- Go to the Library > Mass Editor Tab
- Create a custom filter with the old root folder path
- Once the series have been found find the Root Paths drop down and select the new root path that you want these artists to be moved to.
- Next you'll receive a pop-up that states Would you like to move the artist folders to '<root path>'? Simply select No if the you do not want Lidarr to move your files
- If you would like to remove this warning simply find the artist that is still using the old root folder and edit it to the correct root folder
- This error is typically identified if an artist is looking for a root folder but that root folder is no longer available.
Readarr
- Missing root folder
- This error is typically identified if an author is looking for a root folder but that root folder is no longer available.
- If you would like to remove this warning simply find the author that is still using the old root folder and edit it to the correct root folder
- Go to the Library > Mass Editor Tab
- Create a custom filter with the old root folder path
- Once the series have been found find the Root Paths drop down and select the new root path that you want these authors to be moved to.
- Next you'll receive a pop-up that states Would you like to move the author folders to '<root path>'? Simply select No if the you do not want Readarr to move your files
- If you would like to remove this warning simply find the author that is still using the old root folder and edit it to the correct root folder
- This error is typically identified if an author is looking for a root folder but that root folder is no longer available.
Media
Radarr
- Movie was removed from TMDb
- The movie is linked to a TMDb Id that was deleted from TMDb, usually because it was a duplicate, wasn't a movie or changed ID for some other reason. Deleted movies will not receive any updates and should be corrected by the user to ensure continued functionality. Remove the movie from Radarr without deleting the files, then try to re-add it. If it doesn't show up in a search, check Radarr because it might be a TV miniseries like Stephen King's It.
- You can find and edit deleted movies by creating a custom filter using the following steps: 1. Click Movies from the left menu 2. Click the dropdown on Filter and select “Custom Filter” 3. Enter a label, for example “Deleted Movies” 4. Make the filter as follows: Status is Deleted 5. Click save and select the newly created filter from the filter dropdown menu
- The movie is linked to a TMDb Id that was deleted from TMDb, usually because it was a duplicate, wasn't a movie or changed ID for some other reason. Deleted movies will not receive any updates and should be corrected by the user to ensure continued functionality. Remove the movie from Radarr without deleting the files, then try to re-add it. If it doesn't show up in a search, check Radarr because it might be a TV miniseries like Stephen King's It.
- Typically this simply means that Radarr is no longer able to communicate via API or via logging in to your chosen list provider. Your best bet if the problem persists is to contact them in order to rule them out, as their systems maybe overloaded from time to time.
Sonarr
- Series Removed from TheTVDB
- The affected series were removed from TheTVDB, this usually happens because it is a duplicate or considered part of a different series. To correct you will need to remove the affected series and add the correct series.
Lidarr
Text
Readarr
Text
Disk Space
Radarr
- This section will show you available disk space
- In docker this can be tricky as it will typically show you the available space within your Docker image
Sonarr
- This section will show you available disk space
- In docker this can be tricky as it will typically show you the available space within your Docker image
Lidarr
- This section will show you available disk space
- In docker this can be tricky as it will typically show you the available space within your Docker image
Readarr
- This section will show you available disk space
- In docker this can be tricky as it will typically show you the available space within your Docker image
About
Radarr
This will tell you about your current install of Radarr
Sonarr
This will tell you about your current install of Radarr
Lidarr
This will tell you about your current install of Lidarr
Readarr
This will tell you about your current install of Readarr
More Info
Radarr
- Home Page: Radarr's home page
- Wiki: You're here already
- Reddit: r/radarr
- Discord: Join our discord
- Donations: If you're feeling generous and would like to donate click here
- Donations to Sonarr: If you're feeling generous and would like to donate to the project that started it all click here
- Source: Github
- Feature Requests: Got a great idea drop it here
Sonarr
- Home page: Sonarr's home page
- Forums: Sonarr Forums
- Discord: Join our discord
- Reddit: r/sonarr
- Twitter: @sonarrtv
- IRC: #sonarr on Freenode
- Wiki: You're here already
- Donations: If you're feeling generous and would like to donate click here
- Source: https://github.com/Sonarr/Sonarr Github]
- Feature Requests: Got a great idea drop it on Github here
Lidarr
- Home page: Lidarr's home page
- Wiki: You're here already
- Reddit: r/lidarr
- Discord: Join our discord
- Donations: If you're feeling generous and would like to donate click here
- Donations to Sonarr: If you're feeling generous and would like to donate to the project that started it all click here
- Source: Github
- Feature Requests: Got a great idea drop it on GitHub here
Readarr
- Home page: Readarr's home page
- Wiki: You're here already
- Reddit: r/readarr
- Discord: Join our discord
- Donations: If you're feeling generous and would like to donate click here
- Donations to Sonarr: If you're feeling generous and would like to donate to the project that started it all click here
- Source: Github
- Feature Requests: Got a great idea drop it click here